-
Q31.Defective - UFB-Fusion
Q : My converter used to work perfectly, but now it doesn’t seem to work anymore, it seems to be defective.
Please try the troubleshooting methods as below:
1. Make sure you have followed a firmware update guide to do firmware update first.
2. Make sure the converter LED is on when it is plugged in Console/PC.
3. Switch another USB port and retry.
4. Use other fighting sticks/controllers and retry.
5. Switch to other mode on fighting sticks and retry.
6. Connect the UFB-Fusion to PC, then press buttons in Device and Printers, and make sureif it works.
If it doesn't help, please contact your original place of purchase for assistance.
For further assistance, please log on to Brook's official website, go to“Contact us", and leave your message, we will contact you soon. -
Q32.Other Technical Questions - Gen-5X Fighting Board
Q : Getting an erroe in use update fails at 15 %, PS5 will not allow me to use controller, what can i do ?
A: To set the USB wired mode, please turn on the Use USB Cable of the PS5 main unit before use.
Remember to re-login to the PS5 console.
Q : How to change SOCD mode?
A : Hold down the corresponding button first, then insert the power cable into the console to switch modes.
Q : Installation Dimensions
-
Q33.Other Technical Questions - Gen-5X mini Fighting Board
Q : Getting an erroe in use update fails at 15 %, PS5 will not allow me to use controller, what can i do ?
A: To set the USB wired mode, please turn on the Use USB Cable of the PS5 main unit before use.
Remember to re-login to the PS5 console.
Q : How to change SOCD mode?
A : Hold down the corresponding button first, then insert the power cable into the console to switch modes.
-
Q34.Other Technical Questions - P5 PLUS Fighting Board
Q : How to change SOCD mode?
A :
Q : What is dimension of the board of P5 PLUS Fighting Board?
A : 9.6*4.5 cm
Q : What is the expected input lag ?
A : The average input lag is around 0.71 ms( Test method : Use Zero Plus logic analyzer to detect the performance of this product on the PS5 platform to get average input to console latency )
Q : Installation Dimensions
Q : The P5 PLUS Fighting Board does not work in Qanba 2009 Arcade, what can I do?
A:
1P & 2P Video :
https://drive.google.com/file/d/1oLO28oPBVDj6smrsV2V3qlRwmIPgQ1F6/view?usp=drive_linkWhile 2 on the dip switch correspond to 2 button , which means is 2P (PS4/PS5 mode).
1P = PS3
2P = PS4、PS5
3P = PC
1K = Switch
-
Q35.Other Technical Questions - P5 mini Fighting Board
Q : What are M1 and M2 for?
A : They are for LS/RS/DP Switch.
Q : How to change SOCD mode?
Q: Can I use simulate LS, RS, and DP functions?
A: Yes . the operation is the same as Brook Fighting PS3/PS4.
-
Q36.Other Technical Questions - PS4+ Audio Fighting Board
Q : I have connected PS4 Audio Fighting Board and UFB-UP5, but it cannot play PS5 fighting games and shows "PS5 games cannot be played with the current controller"? What can I do?
A :
a : Update the firmware.
b : Check the red wire is the position of Pin 1.
c : Check UFB-UP5 component damage or not .
d : Reassemble the red wire VDD_5V and the black wire GND.
Q : When I connect the PS4 Audio Fighting Board to the Switch dock, the PS4 Audio Fighting Board won't connect?
A : Before you connect the controller to the Switch dock, make sure you have turned on "Pro Controller Wired Communication" in System Settings on Switch.
B : Reboot Switch and try again.
C: Try another USB port.
Q : When I connect PS4 Audio Fighting Board to PS4 / PS3 / SW / PC, it keeps moving up and left?
A : Make sure J14 (3DVR) is connected to Jumper.
Q : Installation Dimensions
PS4 Audio Fighting Board :
UFB-UP5 :
-
Q37.Other Technical Questions - UFB-Fusion
Q : I have a UFB-Fusion fighting Board, and I don’t know how to solder, what can I do ?
A : Please log onto Brook’s official website to see how to connect each cable and pin.
UFB-Fusion Board : https://www.brookaccessory.com/detail/27402750/
Q : Does J6-1 have the same function as J6 ?
A : Yes, they are for power. You can choose either one of them for power.
Q : My UFB-Fusion cannot play PS5 fighting games and shows " PS5 games cannot be played with the current controller " ? What can I do ?
A : Update the firmware.
B : Try other USB cable.
C : Switch to PS4 mode (Hold down 2P button and then plug USB cable to PC / console)
* Hold down Option (menu) button and then plug USB cable to PC / console to switch back to the automatic detection mode.
Q : My UFB-Fusion does not work on Xbox one ? What can I do ?
A : Update the firmware.
B : Try other USB cable.
C : Switch to Xbox One mode (Hold down 4P button and then plug USB cable to PC / console)
* Hold down Option (menu) button and then plug USB cable to PC / console to switch back to the automatic detection mode.
Q : Installation Dimensions
Q : The UFB-Fusion fighting board does not work in Qanba 2009 Arcade, what can I do?
A:
Video :
1P :
https://drive.google.com/file/d/16MYGmwdJEe-xCUCOLK9zzjSso9c7EVqk/view?usp=drive_link
1P & 2P :
https://drive.google.com/file/d/1YlRiB3YjIZ719is5RHbuHB-LwyBvhUld/view?usp=drive_link
https://qanba.com/u_file/2404/15/file/2009PCB-EN-5c81.pdf
While 2 on the dip switch correspond to 2 button , which means is 2P (PS4/PS5 mode)
1P for PS3
2P for PS4
3P for XB 360
Can't Find What You Need?
If none of the situations apply to you, contact your local distributors who will help you troubleshoot or fill out a technical support form so that we can help you find the best solution.
3F., No.121, Jian 8th Rd., Zhonghe Dist., New Taipei City 23585, Taiwan
Tel: +886-2-6620-2225 #361｜Fax: +886-2-6620-2226｜Business Hours: 10:00 AM to 6:00 PM (GMT+8)